Bay Explosion-Proof Permanent magnet axial flow pump: Technical Overview and Applications
The Bay Explosion-Proof Permanent Magnet Axial Flow Pump is an advanced industrial pumping solution designed for hazardous environments where explosion-proof performance and high efficiency are essential. This pump integrates permanent magnet motor technology with axial flow design to ensure superior energy efficiency, reliable operation, and long service life. It is widely used in chemical, petrochemical, and wastewater treatment industries where safety, reliability, and operational performance are critical.
Introduction
Product Features
Technical Specifications
Safety Instructions
Maintenance Recommendations
Common Faults and Troubleshooting
Application Fields
Installation Guidelines
Quality Control and Certification
Conclusion
The Bay Explosion-Proof Permanent Magnet Axial Flow Pump represents the latest in industrial pump engineering, combining the benefits of permanent magnet motors with axial flow design. Axial flow pumps are known for their high flow rates and low pressure heads, making them ideal for moving large volumes of fluid efficiently. The explosion-proof design ensures safe operation in flammable or combustible environments, meeting stringent industrial safety standards.
The pump is designed with robust construction, high energy efficiency, and reliability in mind. Key features include:
Permanent Magnet Motor: Reduces energy consumption and increases efficiency.
Explosion-Proof Housing: Certified for use in hazardous environments.
Axial Flow Design: Optimized for high flow rates and low energy losses.
Corrosion-Resistant Materials: Suitable for chemical fluids and wastewater.
Low Maintenance: Bearings and seals are designed for extended life.
| Parameter | Specification |
|---|---|
| Motor Type | Permanent Magnet Synchronous Motor |
| Power Rating | 5 kW – 200 kW |
| Voltage | 380V / 660V, Three-phase |
| Flow Rate | 50 – 5000 m3/h |
| Head | 5 – 20 m |
| Speed | 1450 – 2950 RPM |
| Material | Stainless Steel / Cast Iron options |
| Protection | IP55 / Explosion-proof grade Ex d IIB T4 |
| Temperature Range | -20°C to 80°C |
Proper safety practices are critical when operating the Bay Explosion-Proof Pump:
Explosion-Proof Compliance: Ensure installation in areas compliant with ATEX or IECEx standards.
Electrical Safety: Only certified personnel should perform electrical connections.
Personal Protective Equipment (PPE): Operators must wear gloves, goggles, and protective clothing.
Fluid Compatibility: Confirm that the pumped medium is compatible with pump materials to prevent corrosion or degradation.
Emergency Shutoff: Always verify that emergency stop mechanisms are operational before starting the pump.
Routine maintenance ensures long-term efficiency and reliability:
Daily Checks: Inspect for abnormal vibrations, noises, or leaks.
Weekly Checks: Lubricate bearings as per manufacturer’s guidelines.
Monthly Maintenance: Examine seals and fasteners; ensure proper alignment of motor and impeller.
Annual Overhaul: Conduct a detailed inspection of internal components, replace worn bearings, and verify motor performance.
Maintenance Tips Table:
| Maintenance Interval | Task | Notes |
|---|---|---|
| Daily | Visual inspection | Look for leaks, vibration, noise |
| Weekly | Lubricate bearings | Use recommended grease |
| Monthly | Check seals and fasteners | Tighten or replace as necessary |
| Annually | Full inspection and overhaul | Replace worn parts, test motor efficiency |
6. Common Faults and Troubleshooting
| Fault | Possible Cause | Recommended Action |
|---|---|---|
| Pump not starting | Electrical supply issue | Check voltage, fuses, connections |
| Excessive vibration | Misalignment or worn bearings | Realign pump, replace bearings |
| Low flow rate | Blockage or impeller damage | Clean piping, inspect impeller |
| Overheating | Motor overload or insufficient cooling | Reduce load, check ventilation |
The Bay Explosion-Proof Permanent Magnet Axial Flow Pump is highly versatile and suitable for:
Chemical Industry: Safe transfer of flammable liquids and corrosive chemicals.
Petrochemical Facilities: Transport of oils and solvents in hazardous zones.
Wastewater Treatment: High-flow pumping of sewage and sludge.
Mining Operations: Pumping of explosive or volatile liquids.
Proper installation ensures efficient performance and long service life:
Foundation: Install on a level, vibration-free foundation.
Alignment: Align pump shaft with motor to prevent wear.
Piping: Ensure inlet and outlet pipes are correctly sized to avoid cavitation.
Electrical Connections: Verify explosion-proof wiring and grounding.
Startup: Run pump under no-load conditions initially to verify correct rotation and stability.
The pump undergoes rigorous quality control procedures including:
Material inspection and chemical analysis.
Dimensional verification of impellers and shafts.
Motor performance testing under load.
Certification according to ATEX, IECEx, and ISO 9001 standards.
The Bay Explosion-Proof Permanent Magnet Axial Flow Pump combines energy-efficient permanent magnet technology with explosion-proof reliability, making it ideal for hazardous industrial environments. Its robust construction, low maintenance, and high performance ensure long-term operational efficiency. By following proper installation, maintenance, and safety protocols, users can maximize performance and minimize downtime, making it a top choice for chemical, petrochemical, wastewater, and mining applications.
Phone：+86 15868545868/+8618968868555
whatsapp：+86 15868545868/+8618968868555
Email：haiwan@haiwanpump.cn
Add：Meiao Street, Qiaoxia Town, Yongjia County Wenzhou City, Zhejiang, China
Copyright ? 2025 Zhejiang Haiwan Pump Industry Co., Ltd.
Pусский
???????
中文
Phone